Gaming Table Sizes

For all pople who are thinking about the best size for a gaming table, I looked up the recommended size in a few rule sets, to get an impression for what size is mostly needed.

So the most common size is 120x180, or 6 small modules of 60x60cm.
Always remember, you need a surface where you can put your gaming modules on.
A common ping-pong Table is 274 x 152,5 cm, a paste table is roughly 300 x 60 cm, the ordinary kitchen table 120 x 80 cm.
When you're placing the 60x60cm modules on a kitchen table they're overlapping the table 20 to 30cm at each side. Keep that in mind when you're placing heavy objects near the edge of the gaming table.
Hard polystyrene boards are about 120x60cm. You can either place them under your modules to provide more stability or build your gaming table directly of those boards, 3 of them make the common gaming table size.

May 2007 by WitchfinderGeneral

The Tavern - part 2

Here's my solution for the problem with the 2nd floor that is hiding everything: Just pull the 1st floor wall more to the front. Very easy. I bought another 4 pieces of wood. The one is a bit longer than necessary to give the constuction more strength.

Then I had another idea - Fortunately before I glued everything together! I wanted all the interior movable, so I needed a connection system. I first thought about some kind of plug connection or to try out small pieces magnetic paper. But why not using real magnets?? I'll cover everything with parquet flooring so I can drill cut and glue whatever I want under the floor.

I organized some 5mm quadratic magnets, these will be in the wall. For the 2nd floor wall I'll use 1cm round (but only 3mm thick) magnets.

Now to the work: Here you can see how it looked like after I cut the holes for the magnets.
Tavern WIP holes 1st floor

Here you see the holes in the 2nd floor wall. I had to cut them with a knife which was no fun at all.
Tavern WIP holes 2nd floor

To cover the floor and the walls I used 2 different kinds of coffee stirrers (left: 140 × 6,5 × 1mm, right: 140 × 5 × 1,3mm).
Coffee stirrers 140x6,5x1 140x5x1,3
The smaller ones are more in scale. But which room is 20 metres long? So I used the larger stirrers for the floor, this way the room looks a little bit smaller. The smaller stirrers were used for the wall. This way it looks more interesting and there'll be a lot of other stuff hanging at the walls anyway.

This is how it looked when everything was assembled and I started with the boarding.
Tavern WIP boearding

And that's the finished tavern!
Tavern WIP finished

Tavern WIP finished detail
...a lot of important parts like the handrails, doors, stairs, lamps, tables, etc. were still missing at this point.

April 2007 by Chris WitchfinderGeneral

Crusader the Ion Age - is coming soon

I don't want to do much "news" stuff in my weblog, there are other sites that do that job better. But today I found something on the web I think that needs to be mentioned.
Crusader the Ion Age is the new game that's coming out soon (and I hope really soon!) from Alternative Armies.
It will be on platoon level and one 28mm mini representing one man.
Their website says it is "depicting the Human Confederacy and their Crusaders, the ancient Khanate Empire and their allies; with more alien races being released as time progresses." - This sounds to me like the basic idea of 40k Rogue Trader!
And now look at some of the figures

Crusader The Ion Age teaser image

Absolutely awesome!!
At least to me. :D
I just love this old figure style, mixing 80's spaceflight outfits with Roman Empire and Steampunk elements.
More infos here when I get them!

March 2007 by WitchfinderGeneral